doctools-nightly/Doc3dImageViewer.html

Positionals:

  1 TEXT:FILE REQUIRED                  vol file (.vol, .longvol .p3d, .pgm3d and if WITH_ITK is selected: dicom, dcm, mha, mhd). For longvol, dicom, dcm, mha or mhd formats, the input values are linearly scaled between 0 and 255.

  s TEXT                                display a set of discrete points (.sdp)


Options:

  -h,--help                             Print this help message and exit

  -i,--input TEXT:FILE REQUIRED         vol file (.vol, .longvol .p3d, .pgm3d and if WITH_ITK is selected: dicom, dcm, mha, mhd). For longvol, dicom, dcm, mha or mhd formats, the input values are linearly scaled between 0 and 255.

  --grid                                draw slice images using grid mode.

  --intergrid                           draw slice images using inter grid mode.

  --emptyMode                           remove the default boundingbox display.

  --thresholdImage                      threshold the image to define binary shape

  --thresholdMin INT=0                  threshold min to define binary shape

  --thresholdMax INT=255                threshold maw to define binary shape

  --displaySDP TEXT                     display a set of discrete points (.sdp)

  --SDPindex UINT x 3                   specify the sdp index.

  --SDPball FLOAT=0                     use balls to display a set of discrete points (if not set to 0 and used with displaySDP option).

  --displayMesh TEXT                    display a Mesh given in OFF or OFS format.

  --displayDigitalSurface               display the digital surface instead of display all the set of voxels (used with thresholdImage or displaySDP options)

  --colorizeCC                          colorize each Connected Components of the surface displayed by displayDigitalSurface option.

  -c,--colorSDP UINT x 4                set the color  discrete points: r g b a

  --colorMesh UINT x 4                  set the color of Mesh (given from displayMesh option) : r g b a

  -x,--scaleX FLOAT=1                   set the scale value in the X direction

  -y,--scaleY FLOAT=1                   set the scale value in the Y direction

  -z,--scaleZ FLOAT=1                   set the scale value in the Z direction

  --rescaleInputMin INT=0               min value used to rescale the input intensity (to avoid basic cast into 8  bits image).

  --rescaleInputMax INT=255             max value used to rescale the input intensity (to avoid basic cast into 8  bits image).

  -t,--transparency UINT=?              change the default transparency